logo.png (25581 bytes)  national debt  wwp3.JPG (28012 bytes)  Meet Grace

            

Home Up

PayPal_Verification_Seal.gif (3677 bytes)

Made in USA Logo.gif (9528 bytes)

youtube-film.jpg (24984 bytes)

 

US and Canada Ordering Page  UNST0001.GIF (6793 bytes) CANA0001.GIF (4741 bytes)

These products work ONLY with Soda-Club / Sodastream Soda Machines manufactured for the US and Canadian Market.

Please read our Shipping Policy for our full terms and conditions as well as additional Shipping Charges that may apply.  Should you need further assistance in choosing the best Product for your specific needs, please read our Product Selector or drop us a line.  All selections below are easily made by using the drop-down menu, selecting the desired product configuration, and then pressing the "Add to Cart" Button.  Click on Pictures for Product Specification Details

CO2Dapter-II™ Starting at 49.99 + Priority Shipping

CO2D2-18NPT.jpg (57156 bytes) CO2D2-CGAM.jpg (75010 bytes) CO2D2-CGAF.jpg (82032 bytes) CO2D2-PBFILL.jpg (62591 bytes)

Configuration Option Abbreviations and Descriptions

1/8 NPT = 1/8" Female Pipe Thread Fitting on ALCO2JET Tank Thread Adapter

CGA Male = Male CGA-320 Fitting ALCO2JET Tank Thread Adapter for Regulator Attachment (Aquarium Use)

CGA Female = Female CGA-320 Fitting on ALCO2JET Tank Thread Adapter for CO2 Donor Tank used in Refilling

PBFILL = Paintball Tank Threads on Fill End  opposite of the Carbonator Tank end for Paintball Shop Refilling

 

NOTE: ALL of these adapters require that you either have NON BOOBY-TRAPPED Carbonator Tank Valves or that you purchase a FreedomValve™ to replace the BOOBY-TRAPPED factory valve on each Carbonator Tank you wish to refill yourself or at a Paintball or Sporting Goods Store.   Failure to do so will result in your inability to successfully refill them.  If you are not sure if your valve is booby-trapped, please ask us FIRST.   We DO NOT guarantee that Paintball Stores will refill your Carbonator tanks, some refuse to do so.   Please check with them BEFORE purchasing!

 

NOTE: You MUST use a CGA-320 CO2 Tank with installed Siphon tube so that it dispenses LIQUID CO2 which is necessary for REFILLING of   Sodastream Tanks.  Kegerator or Beverage type tanks will NOT work.   For Do-It-Yourself types, please use ONLY high pressure 3000psi rated hose.  Using anything else is dangerous and voids your Warranty.

 

NOTE: To use the CO2Dapter-II in an Aquarium or Hydroponics environment, select the one with CGA-320 Male outlet so you can attach a standard CO2 Regulator and use it with a Kegerator type non-siphon tank that dispenses GAS CO2.

 

NOTE: You build the CO2Dapter-II™ model you want by selecting the desired options.  For example: "CO2Dapter-II™ with CGA (first picture) is a CO2Dapter-II™  with a CGA-320 Fitting for direct connection to a CO2 Siphon Type Donor Tank.

 

Extra Parts and Accessories are available for "Do-It-Yourself" Configurations in our Parts Area in the lower half of this page.

CO2Dapter-II Options, order below by using the drop-down option selector and click "Add to Cart" Button
     

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

FillStationPro-II™  - Starting at 89.99 + Priority Shipping 

INCLUDES A FREE DIGITAL WEIGHT SCALE, LIMITED TIME OFFER!

FSPII-STD.jpg (86855 bytes) FSPIIDXSTD.jpg (89147 bytes) FSPII-COIL.jpg (111942 bytes) FSPIIDX-COIL.jpg (109688 bytes)

Configuration Option Abbreviations and Descriptions

FSPSODA = FillStationPro-II™ for Refilling Sodastream Tanks, 24" High Pressure Hose

FSPPB = FillStationPro-II™ for Refilling our Beverage Grade Paintball Tanks, 24" High Pressure Hose

FSPDX = FillStationPro-II™ Deluxe for Refilling Sodastream AND Paintball Tanks, 24" High Pressure Hose

FSPSODA-COIL = FillStationPro-II™ for Refilling Sodastream Tanks, Coiled 24" to 37" High Pressure Hose

FSPPB-COIL = FillStationPro-II™ for Refilling our Beverage Grade Paintball Tanks, Coiled 24" to 37" High Pressure Hose

FSPDX-COIL = FillStationPro-II™ Deluxe for Refilling Sodastream AND Paintball Tanks, Coiled 24" to 37" High Pressure Hose

 

NOTE: ALL FillStationPro-II™ products require that you have NON BOOBY-TRAPPED Carbonator Tank Valves or that you purchase a FreedomValve™ to replace the BOOBY-TRAPPED factory valve on each Carbonator Tank you wish to refill yourself.   Failure to do so will result in your inability to successfully refill them.  If you are not sure if your valve is booby-trapped, please ask us FIRST before ordering or compare your valve to the photos on our FreedomValve™ web page.

 

NOTE: You MUST use a Donor Tank (tank you fill from) with a US Standard CGA-320 CO2 outlet valve and an installed Siphon tube so that it dispenses LIQUID CO2 which is necessary for any refilling of tanks.  Kegerator or Beverage type tanks will NOT work.

 

HOW TO ORDR: You build the FillStationPro-II™ model you want by selecting the item with the options you want.

For example: An "FSPSODA" is a FillStationPro-II™ with standard 24" Hose and a Sodastream Tank Compatible Fill Head for refilling of Sodastream Carbonator Tanks ONLY.  The FillStationPro-II™ comes with one CGA-320 Tank Seal Washer.

 

FillStationPro-II Options, order below by using the drop-down option selector and click "Add to Cart" Button
            

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

FreedomOne-PBI™ Paintball Tank Thread Adapter for Sodastream Machines ONLY

Allows use of standard Paintball Tanks or Beverage Grade Tanks (as we sell) internally. Tank capacities vary with machine model.

$34.99 + Standard Shipping for Adapter

$3.99 + Shipping for Spare Parts

F1PBI2.jpg (88651 bytes)     PBI-3Tanks.JPG (27691 bytes)

Tanks NOT included and shown for reference only.

FreedomOne-PBI Options, order below by using the drop-down option selector and click "Add to Cart" Button
    

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

 

FreedomOne+™ External CO2 Tank System for Sodastream Machines

Starting at 79.99 + Priority Shipping

F1-CGA.jpg (82123 bytes)  F1-CGAWG.jpg (82103 bytes)  F1-COIL-CGAWG.jpg (94989 bytes)  machine.JPG (4171 bytes)

Configuration Option Abbreviations and Descriptions

Soda Machine NOT included and shown for reference ONLY!

OPTIONS

CGA = CGA-320 CO2 Tank Connection for connecting the to an external standard non-siphon CO2 Tank

CGAWG = CGA-320 CO2 Tank Connection With Pressure Gauge for connecting to an external standard non-siphon CO2 Tank

24H = 24" High Pressure Hose

36H = 36" High Pressure Hose (most popular length)

48H = 48" High Pressure Hose

72H = 72" High Pressure Hose

COILH = Coiled Hose, expands from 24" to 37"

 

NOTE: You build the FreedomOne+™ model by selecting the options you want.  For example: "FreedomOne+™ Adapter With 24H and CGAWG options" is a FreedomOne+™ with a 24" High Pressure Hose with a CGA-320 Tank Connection and Pressure Gauge.

 

FreedomOne+ Options, order below by using the drop-down option selector and click "Add to Cart" Button
        

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

 

FreedomOne+CU™ External CO2 Tank System for Cuisinart Soda Machine

Works ONLY with the Cuisinart brand Soda Machine, NOT for use with other Brands.

Incorrect orders subject to a 25% Restock Charge, be 100% Sure you have a Cuisinart!

Starting at 79.99 + Priority Shipping

F1-CGA.jpg (82123 bytes)  F1-CGAWG.jpg (82103 bytes)  F1-COIL-CGAWG.jpg (94989 bytes)  wpe1.jpg (4630 bytes)

Soda Machine NOT included and shown for reference ONLY!

Configuration Option Abbreviations and Descriptions

OPTIONS

CGA = CGA-320 CO2 Tank Connection for connecting the to an external standard non-siphon CO2 Tank

CGAWG = CGA-320 CO2 Tank Connection With Pressure Gauge for connecting to an external standard non-siphon CO2 Tank

24H = 24" High Pressure Hose

36H = 36" High Pressure Hose (most popular length)

48H = 48" High Pressure Hose

72H = 72" High Pressure Hose

COILH = Coiled Hose, expands from 24" to 37"

 

NOTE: You build the FreedomOne+CU™ model by selecting the options you want.  For example: "FreedomOne+CU™ Adapter With 24H and CGAWG options" is a FreedomOne+CU™ with a 24" High Pressure Hose with a CGA-320 Tank Connection and Pressure Gauge.

 

FreedomOne+CU Options, order below by using the drop-down option selector and click "Add to Cart" Button
         

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

FreedomValve™ Non Booby-Trapped ALCO2JET Carbonator Valve  $29.99 + Priority Shipping

valve2.JPG (30053 bytes)

FreedomValve

valve.jpg (22979 bytes)

Photo of Booby-Trapped Valve

 

BOOBY-TRAPPED VALVE SHOWN ABOVE

Our solution that ELIMINATES the anti-refill booby-trap that Sodastream built in to their Carbonator Tank Valves sold after 2008 (see photo below).

Our FreedomValve™ is a Replacement Valve that allows 60L; 110L/130L Carbonator Tank refilling without interruptions, booby-traps, or other deliberate inconveniences designed by Sodastream to force you into buying their over-priced CO2.

Our Valve is 100% Sodastream Tank and Machine compatible with the 60L and 110L/130L Carbonator Tanks.  CNC Machined out of solid Brass and is field repairable with our repair kit below and basic tools.  No need to dangerously modify factory valves which are NOT repairable.  Valve comes with Tank O-Ring as shown in photo.

NOTE: You will still need a CO2Dapter-II™ or FillStationPro-II™ to Refill your Carbonator tanks.  All this valve does is ELIMINATE the anti-refill Booby-Trap in the original Sodastream Carbonator Tanks.

 

FreedomValve, order below by using the drop-down quantity selector and click "Add to Cart" Button
     

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

 

Seals - O-Rings - Consummables Section

All Seals and O-Rings are shipped via USPS Standard First Class Mail or Parcel Post Shipping within the 50 United States ONLY.   International Orders subject to higher shipping costs, billed separately, depending on the destination country unless these Parts and Accessories are part of a larger order with proper international shipping charges.  See Shipping Policy section for more details and costs.   Prior to placing an order please READ, UNDERSTAND, and AGREE to our Conditions of Sale and Use.

160X120-024.jpg (15128 bytes)

High Pressure Pipe Thread Sealant $8.99

Tube of specially formulated Non-Toxic High Pressure Thread Sealant for use in CO2 Gas thread sealing and leak repair or when re-configuring or adding options to your beverage system.

Package Content: One .2oz Tube

 

  160X120-019.jpg (16462 bytes) cga320set.jpg (39263 bytes)

CGA-320 Tank Seal Washer $5.99

Seal Washer that installs inside the Brass CGA-320 Nut which attaches to your bulk CO2 Tank.  Brass fitting shown for reference only, NOT included.

Package Content: Two Seal Washers

CO2D2SEAL.jpg (86543 bytes) 160x120004.jpg (20374 bytes)

CO2Dapter-II™Seal $7.99

Seal for currently shipping CO2Dapter-II™.  You MUST lubricate with a non-toxic lubricant during installation.  We suggest purchasing the one we sell here as it has been tested for use with our products.  CO2Dapter-II shown for reference only, NOT included.

Package Content: Two Seals

NOTE: Only for Newest Currently Shipping CO2Dapter-II™ with the THICK large white 1" Seal.  Order this if you want spares for any currently shipping CO2Dapter-II™.   Please measure old seal for correctness BEFORE ordering.   eMail us for OLDER discontinued product seals.

Installation Instructions available HERE.

 

  small-o-ring.jpg (36021 bytes)black qd2.JPG (25606 bytes) QDORINLOC.JPG (21014 bytes)

Quick-Disconnect O-Ring $7.99

Female Quick-Disconnect Internal O-Ring.   Installs inside locking collar on female quick-disconnect coupler.  You MUST lubricate with a non-toxic lubricant during installation.  We suggest purchasing the one we sell here as it has been tested for use with our products.  Quick-Disconnect fitting shown for reference only, NOT included.

Package Content: Two O-Rings

FSPIIREBLD.jpg (34227 bytes)

FillStationPro-II Rebuild Seal Kit $8.99

Internal O-Ring seal kit for FillStationPro-II™ Fill Valve Block.  Requires Fill Valve disassembly and removal of locking Roll Pin to replace O-Ring and Flow Valve Seals.

Package Content: 1 Tube of Non-Toxic Lubricant; CGA-320 Tank Seal Washer; CO2Dapter-II Fill-Head Seal; On/OFF Shaft Retaining Pin; Two sets of O-Rings (only need 1 set, other set is spare); Two replacement Ball Seals.  You MUST lubricate with the included silicone grease.

Installation Instructions available HERE.

 

  160X120-032.jpg (16919 bytes) 160x120022.jpg (12046 bytes)

Soda Machine Carbonator Tank Seal $7.99

Soda-Club / Sodastream Soda Machine Carbonator Tank Seal.  Unlike the black hard plastic Sodastream ones that do not seal properly, ours are made from Food Grade FDA Approved Soft Nitrile Rubber.

Fits all Soda-Club / Sodastream Soda Machine Models that use the 60L or 130L Carbonator Tanks and black plastic seals.  Soda Machine or Tank is NOT included, for reference only.

Package Content: Two Seals

320X240-027.jpg (88771 bytes)320X240-039.jpg (54076 bytes)

Tank Valve O-Rings for 60L and 110L Sodastream Carbonator Tanks $7.99

Replaces the O-Ring at the base of the brass valve which screws in to the 60L or 110L Sodastream Carbonator Tanks.  Compatible with  either the Soda-Club or Sodastream Valves or our FreedomValve.  Valve shown only for reference, NOT included.

Package Content:  Two O-Rings

 

  320X240-016.jpg (77918 bytes)320x240007.jpg (45472 bytes)320x002.jpg (77777 bytes)

Paintball Tank ON/OFF Knob Seal Kit $6.99

Replaces the O-Ring Seals located inside the Paintball Tank ON/OFF Knob's brass center pin.  You MUST lubricate with a non-toxic lubricant during installation.  We suggest purchasing the one we sell here as it has been tested for use with our products.   Valve Knob NOT included, shown for reference only.

Package Content:  Two O-Rings (repairs/rebuilds one ON/OFF Knob)

 

DSCN0666.jpg (8026 bytes) Non-Toxic Seal Lubricant

$7.99 for 2oz Bottle

Non-Toxic FDA Approved Lubricant for routine lubrication of o-rings and seals and fittings that come in contact with consumable CO2 in our products.   Keeps seals pliable and prevents leaks or premature seal failure due to drying.   Packaged in a convenient re-usable squeeze bottle easy drop by drop dispensing.

Package Content: One 2oz Bottle

 

 
ptfelube2.JPG (2011 bytes) Non-Toxic Seal Lubricant

$12.99 for 4oz Bottle (BEST VALUE)

Non-Toxic FDA Approved Lubricant for routine lubrication of o-rings and seals and fittings that come in contact with consumable CO2 in our products.   Keeps seals pliable and prevents leaks or premature seal failure due to drying.   Packaged in a convenient 4oz Bottle for easy dispensing.

Package Content: One 4oz Bottle

     
Seals & Consummables, order below by using the drop-down Product Selector and click "Add to Cart" Button
          

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

Parts and Accessories Section

All Parts and Accessory are shipped via USPS Standard First Class Mail or Parcel Post Shipping within the 50 United States ONLY.   International Orders subject to higher shipping costs, billed separately, depending on the destination country unless these Parts and Accessories are part of a larger order with proper international shipping charges.  See Shipping Policy section for more details and costs.   Prior to placing an order please READ, UNDERSTAND, and AGREE to our Conditions of Sale and Use.

black qd2.JPG (25606 bytes)

Quick-Disconnect Female Coupling $8.99

Quick-Disconnect Female Coupling with 1/8" NPT Female threaded end.

Package Content: One Coupling with pre-installed inner O-Ring seal

 

  nipple.jpg (13759 bytes)

Quick-Disconnect Male Nipple $7.99

Quick-Disconnect Male Nipple with 1/8" NPT Male threaded end.  Comes pre-taped with Teflon tape.

Package Content: One Nipple

 

black qd2.JPG (25606 bytes)nipple.jpg (13759 bytes)

Quick-Disconnect Coupler Set $15.99

Quick-Disconnect Coupling Set consisting of a Male Nipple with 1/8" NPT Male threads, pre-taped with Teflon Thread Sealing Tape, and Female Coupling with 1/8" NPT Female threads.

Package Content: One Male Nipple and One Female Coupling with pre-installed internal O-Ring seal.

 

  valve2.JPG (30053 bytes)

FreedomOne™ and/or FreedomValve™ Valve Rebuild Kit $9.99

FreedomValve and FreedomOne Valve Rebuild Kit for re-building your valve if it ever starts leaking or getting stuck open due to wear.  Usually a good cleaning is all that is needed but if the seal is damaged, then it's definitely REBUILD Tie.  Includes  brass internal Valve Pin assembly with pre-installed FDA approved gas seal and stainless steel Pressure Spring.

Package Content: One Kit as pictured for rebuilding ONE valve.

 

160x120007.jpg (12402 bytes)

Paintball CO2 Tank Connection ON/OFF Knob and 1/8" Quick-Disconnect Male Outlet $19.99

Paintball Fill Adapter with twist ON/OFF Knob and a 1/8" Male Quick-Disconnect Nipple.  Threads on to standard 5/8" Paintball Tank Pin-Valve Threads.   Package Content: One ON/OF Valve as pictured

NOTE: Order this if ordering a replacement for use with our FreedomOne product with a Paintball Tank instead of a standard CGA-320 CO2 tank.

  640x002.jpg (297380 bytes)

Paintball CO2 Tank Connection ON/OFF Knob with Gauge and 1/8" Quick-Disconnect Male Outlet $32.99

Paintball Fill Adapter with twist ON/OFF Knob, Tank Pressure Gauge, and a 1/8" Male Quick-Disconnect Nipple.  Threads on to standard 5/8" Paintball Tank Pin-Valve Threads.   Package Content: One ON/OFF Valve as pictured

NOTE: Order this if ordering a replacement for use with our FreedomOne product with a Paintball Tank instead of a standard CGA-320 CO2 tank.

 

DINNIPMQD.jpg (86545 bytes)

CGA-320 Bulk Tank Fitting and QD Nipple $23.99

CGA-320 CO2 Bulk Tank Fitting with Male Quick-Disconnect Nipple for use with our FreedomOne CO2 Tank System.

Package Content: One Fitting as pictured

  CGANIPWGQD.jpg (55729 bytes)

CGA-320 Bulk Tank Fitting with Pressure Gauge and QD Nipple $36.99

CGA-320 CO2 Bulk Tank Fitting with Gas Pressure Gauge and Male Quick-Disconnect Nipple for use with our FreedomOne CO2 Tank System.

Package Content: One Fitting as pictured

 

320X240-020.jpg (69134 bytes)

40kg Digital Hanging Weight Scale $19.99

Digital readout indicates in Pounds, Ounces, Kilograms, and Grams.  Battery operated with auto-shutoff, Tare, and Zero functions as well as Temperature indications (for detailed liquid/gas/weight calculations).   Same scale we include with our FillStationPro-II filling station.

Package Content: One Scale, 2 "AA" batteries required, NOT included

 

  160x120014.jpg (22589 bytes)

Paintball CO2 Tank Valve O-Ring Seals $6.99

Paintball CO2 Tank replacement O-Ring Seals.  More durable and longer lasting than the cheap stock factory tank o-ring seals.

These o-rings install at the tip of the brass paintball valve and sits in a groove of its own.

Package Content:  TEN O-Rings

     
Parts and Accessories, order below by using the drop-down Product Selector and click "Add to Cart" Button
        

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

CO2 Tank & Accessories Section

DSCN0632.jpg (7399 bytes)

Kegerator / Brewing System Tank "T" $39.99 + Shipping

If you have a Kegerator or Brewing CO2 Tank setup and want to use the same tank for both Beer (regulated side) and our FreedomOne or FreedomOne+ Direct-Connect CO2 Tank System, then this item can save you the cost of an extra Tank.  One end attaches to your Kegerator or Brewing CO2 Tank with the included seal washer and CGA-320 Nut.  The other two male threaded ends are CGA-320 Tank Connections, use one for your regulator and brewing system, use the other for attaching either a FreedomOne or FreedomOne+ system with CGA or CGAWG option.

Package Content: One Fully Assembled "T" and seal washer.   Regulator or FreedomOne NOT included.

 

  1Tank.JPG (18654 bytes)

12oz Paintball CO2 Tank $19.99 + Shipping

12 ounce Aluminum Paintball CO2 Tank with standard Paintball Tank Pin-Valve.  Great for using as an external tank with our FreedomOne-PBI™, FreedomOne or FreedomOne+ with "PB" or "PBWG"option CO2 System.

Package Content: One EMPTY 12oz Tank.

Shipped EMPTY due to USDOT Regulations.  All Paintball Tanks have current Hydro Test dates and are NEW.

 

1Tank.JPG (18654 bytes)

24oz Paintball CO2 Tank $29.99 + Shipping

24 ounce Aluminum Paintball CO2 Tank with standard Paintball Tank Pin-Valve.  Great for using as an external tank with our FreedomOne-PBI™, FreedomOne or FreedomOne+ with "PB" or "PBWG"option CO2 System.

Package Content: One EMPTY 24oz Tank.

Shipped EMPTY due to USDOT Regulations.  All Paintball Tanks have current Hydro Test dates and are NEW.

   
     
CO2 Tanks, order below by using the drop-down Product Selector and click "Add to Cart" Button
      

NOTICE:   By pressing the "ADD TO CART" Button, you certify that you have read, understand, and agree to all the Terms and Conditions of sale listed at the bottom of this web page.  If you DO NOT agree, then DO NOT order our products and immediately terminate your use of this Website.

 

Disclaimers - Terms and Conditions for Sale and Product Use

The names: Primo, Flavorstation 100, Flavorstation 500, Sparkler, Soda-Club, ALCO2JET, and Sodastream USA are owned and trademarked by their respective owners.  CO2Doctor.com is NOT affiliated with Soda-Club or Sodastream USA, nor do we endorse or claim ownership nor rights to any of those Trademarks or product names and they are solely used on our Website to identify their respective marketed products which are marketed by their respective sales organizations.

CO2Doctor.com, nor its owner(s), operators, or affiliates endorse any products nor claim any suitability for use other than as specifically stated in our online product information. All use of our products are solely at the Owner(s) / Buyer(s) risk and they bear the sole responsibility for adhering to their proper use and observation of safety precautions. No other warranties are expressed or implied and none are given or to be assumed. Any use or licensing violations rest solely with the product user and not the website, CO2Doctor.com, or its Owner(s) / Operator(s).

By Ordering and Using any products or services from CO2Doctor.com, you hereby attest that you legally OWN the ALCO2JET CO2 CO2 Tank to be refilled as well as any Valves or associated hardware for said Tank that is claimed to be "Under License" by Sodastream USA or its enterprises.  By reading these terms and purchasing any of our products you hereby agree to hold CO2Doctor.com, its Owner(s) / Operator(s), and affiliates fully harmless and agree to indemnify the same for any and all losses as a result of legal action brought on by the improper or illegal use of our product(s).  CO2Doctor, LLC reserves the right to refuse any sale or service to anyone for any reason.  Please read and agree to our terms and conditions prior to the purchase or use of our products.   Thank You.

All Website Content Copyrighted by CO2Doctor.com 2014.

Unauthorized duplication, copying, or use of any Website pictures, graphics, text, or logos is strictly prohibited and protected by State and Federal Copyright Laws.